Why does my Dimplex Indoor Fireplace circuit breaker trip?
If the circuit breaker trips or a fuse blows when you turn on your Dimplex Indoor Fireplace, it might be due to an improper circuit current rating. Additional appliances may be drawing too much power, exceeding the circuit breaker or fuse's current rating. Try plugging the unit into another outlet, or have a dedicated 15 amp circuit installed for the fireplace.
Why are the lights dimming when my Dimplex Indoor Fireplace is on?
If the lights in the room dim when your Dimplex Indoor Fireplace is on, it could be because the unit is drawing close to the circuit's current rating. To resolve this, try moving the fireplace to another outlet or installing it on a dedicated 15 amp circuit.
What to do if my Dimplex Indoor Fireplace heater emits an odor?
A brief odor when the heater is initially turned on is normal. This occurs as the heater burns off any dust accumulated during manufacturing or operation. If the odor persists or seems unusual, it could indicate a defective heater assembly or loose wiring, in which case you should replace the heater assembly or trace the wiring in the unit.
Why is my Dimplex Indoor Fireplace heater not turning off?
If the heater in your Dimplex Indoor Fireplace is not turning off, it could be due to a defective heater on/off switch, improper operation, or loose wiring. Consider replacing the heater on/off switch and tracing the wiring in the unit.
Why is my Dimplex Indoor Fireplace heater not turning on?
If the heater on your Dimplex Indoor Fireplace isn’t turning on, the issue might stem from a defective heater On/Off switch, a defective heater assembly, improper operation, or loose wiring. You can replace the heater On/Off switch or the heater assembly. Also trace wiring in unit.
What to do if my Dimplex Indoor Fireplace is making excessive noise with the heater on?
Excessive noise when the heater is on in your Dimplex Indoor Fireplace may be caused by a dirty or defective blower assembly. Try cleaning the blower assembly, or if that doesn't work, replace the heater assembly.
Why does my Dimplex Indoor Fireplace turn on and off by itself?
If your Dimplex Indoor Fireplace turns on or off by itself, it could be due to a few reasons. The optional remote control might have a similar frequency to other remotes in the area, or there could be radio frequency disturbance from outside sources. Try replacing the hand held remote control.
What to do if my Dimplex Indoor Fireplace stove does not turn on?
If your Dimplex Indoor Fireplace stove does not turn on, it may be due to improper operation, a defective main On/Off switch, a defective optional remote control, a defective Remote Receiver, or loose wiring. You can replace the main On/Off switch, install a new battery into the handheld transmitter, replace the Remote Receiver, or check wiring connections.
Why is the heating element glowing red in my Dimplex Indoor Fireplace?
Small glowing sections of the heating element are normal. However, if larger sections are glowing and causing the heater to trip the thermal cut out, unplug the unit, discontinue use, and replace the heater assembly.
Why does my Dimplex Indoor Fireplace heater fan run continuously?
If the heater fan in your Dimplex Indoor Fireplace runs continuously, it could be due to loose wiring, a defective heater On/Off switch, or a defective heater assembly. To address this, trace the wiring in the unit, replace the heater On/Off switch or replace heater assembly.
General| Brand | Dimplex |
|---|---|
| Model | Contempra KDS6401E |
| Category | Indoor Fireplace |
| Language | English |
To Next Page