(679 mm)
(587 mm)
(229 mm)
Figure 4
Fireplace Installation
with the following minimum inter-
nal/opening dimensions (Figure
New Wall Construction
Use studs to frame an open-
Option #1:
be run from behind the Trim and
along the wall to an outlet near
Option #2:
-
!
NOTE:
-
breaker trips or fuse blows
on a regular basis when the
Existing Fireplace
Seal all drafts and vents with
-
debris from falling onto the
-
the front of the hearth to an
For Bathroom Use
If this unit is installed in a bath-
To Next Page
Loading...
Need help?
General
Weight and Dimensions
