EasyManua.ls Logo

Dimplex DF2624L - User Manual

Dimplex DF2624L
15 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
7213540100R06
Owners Manual
Model
DF2624L
6908931359
IMPORTANT SAFETY INFORMATION: Always read this manual rst
before attempting to install or use this replace. For your safety, always
comply with all warnings and safety instructions contained in this manual
to prevent personal injury or property damage.
To view the full line of Dimplex products, please visit
www.dimplex.com

Other manuals for Dimplex DF2624L

Questions and Answers

  • C
    Craig TorresSep 2, 2025
    Why is the heater not turning on in my Dimplex Indoor Fireplace?
    • M
      Mr. Michael KnightSep 2, 2025
      If your Dimplex Indoor Fireplace heater is not turning on, but the flame effect is still functioning, ensure proper operation. If the issue persists, there could be loose wiring, which requires tracing the wiring in the unit. Other potential causes include a defective switchboard, heater assembly, or display/control board, all of which would need to be replaced.
  • T
    Terry MorenoAug 31, 2025
    What to do if my Dimplex DF2624L doesn't turn on with the remote?
    • F
      Felicia ElliottAug 31, 2025
      If your Dimplex Indoor Fireplace does not turn on with the remote control, first, ensure proper operation. If the issue persists, the batteries in the remote control may be dead. Try installing new batteries. If it still doesn't work, the display/control board might be defective and require replacement.
  • W
    William SuttonAug 29, 2025
    How to fix excessive noise with the heater on my Dimplex DF2624L Indoor Fireplace?
    • T
      turnermariaAug 29, 2025
      If your Dimplex Indoor Fireplace is making excessive noise with the heater on, it could be due to a dirty heater assembly. Ensure that the exterior intake louvers and firebox cavity are free of dirt and dust. If the noise persists, the heater assembly may be defective and require replacement.
  • Z
    zdavisAug 28, 2025
    Why does my Dimplex DF2624L heater emit an odor?
    • Y
      ybennettAug 28, 2025
      If your Dimplex Indoor Fireplace heater emits an odor, it is normal operation for a brief period after the heater is initially turned on. The heater is burning off any dust accumulated during manufacturing or operation. If the odor persists, the heater assembly may be defective and require replacement.
  • R
    raydakotaAug 26, 2025
    What to do if my Dimplex DF2624L heater turns off after a few minutes?
    • M
      megan46Aug 27, 2025
      If your Dimplex Indoor Fireplace heater is turning off after a couple of minutes, it could be due to a build-up of dirt or dust in the heater assembly. Make sure the exterior intake louvers and firebox cavity are free of dirt and dust. Alternatively, the heater assembly may be defective and require replacement.
  • G
    grace98Aug 25, 2025
    Why is the power cord on my Dimplex DF2624L getting warm?
    • T
      thomashernandezAug 25, 2025
      A power cord that gets slightly warm to the touch when the heater is on is considered normal operation. However, if the cord gets hot to the touch, you should replace the power cord, as it may be defective.
  • J
    James SmithAug 22, 2025
    Why do lights dim when my Dimplex Indoor Fireplace is turned on?
    • L
      Lucas SmithAug 23, 2025
      If the lights dim in the room when your Dimplex Indoor Fireplace is on, it means the unit is drawing close to the circuit's current rating. To resolve this, move the unit to another outlet or install the unit on a dedicated 15 amp circuit.

Summary

Welcome & Congratulations

IMPORTANT INSTRUCTIONS

Fireplace Installation

Glass Installation

Instructions for unpacking and installing the front glass panel into the firebox.

Mantel Installation

Guidance on securing the firebox to a mantel using L-brackets and required opening dimensions.

Bathroom Installation

Safety precautions for installing the firebox in a bathroom, requiring GFI protection.

Operation

Standby Mode

Turns the unit On and Off using the standby button on the remote or unit.

Flame Effects Control

Cycles through different lighting effects like flames, logs, or combinations.

Heat ON;OFF and Thermostat

Controls the heater function based on thermostat setpoint and adjusts temperature settings.

Disable Heater Function

Instructions on how to disable or enable the heater function using specific button combinations.

Sleep Timer Function

Sets the fireplace to automatically shut off after a preset time, adjustable from 30 mins to 8 hours.

Resetting Temperature Cutoff

Procedure to reset the heater if it overheats, involving unplugging and waiting.

Remote Control Battery Replacement

Steps to replace the battery in the remote control, including battery type and disposal.

Maintenance

Glass Cleaning

How to clean the front glass panel using a dry or damp cloth, avoiding abrasives.

Surface Cleaning

Instructions for cleaning painted surfaces using warm water only, avoiding abrasive cleaners.

Servicing

Recommends authorized service representatives for any servicing other than cleaning.

Warranty

One Year Limited Warranty Overview

Details the scope, limitations, and exclusions of the one-year limited warranty for the fireplace.

Getting Service Under Warranty

Information on how to contact Dimplex Technical Service and what proof is required.

Dimplex Responsibilities and Limitations

Outlines Dimplex's obligations, purchaser responsibilities, and liability limitations.

How State and Provincial Law Apply

Explains the legal rights granted by the warranty and how they vary by jurisdiction.

Replacement Parts

Dimplex DF2624L Specifications

General IconGeneral
BrandDimplex
ModelDF2624L
CategoryIndoor Fireplace
LanguageEnglish

Related product manuals