Why is the ember bed dim and not glowing on my Dimplex DLGM29 Electric Heater?
If the ember bed is dim and not glowing, it could be due to: * A loose connection. Check wiring connections. * Defective Ember bed wiring. Replace the Ember bed.
Why does the mist appear to be falling from my Dimplex DLGM29 Electric Heater?
If the mist appears to be “falling”, it might be caused by: * A loose connection. Check heater wiring connections. * A defective Heater. Replace the Heating assembly.
Why are the logs or ember bed still glowing after the Dimplex DLGM29 Electric Heater is turned off?
If the logs or ember bed are still glowing after the unit is turned off, it is likely due to a defective Remote Control Receiver. Replace the Remote Control Receiver.
Describes the unit's physical controls for power and effect toggling.
Details steps for synchronizing the remote control with the unit.
Instructions for cleaning the exterior surfaces of the log grate using a damp cloth.
Details on accessing, cleaning, and maintaining the water reservoir and its components.
Details products covered, excluded, and geographical limitations of the warranty.
Outlines the process for claiming warranty service and what Dimplex will do for defects.
General| Model | DLGM29 |
|---|---|
| Type | Electric Heater |
| Fuel Type | Electric |
| Voltage | 120V |
| Heater Type | Fan-forced |
| Thermostat | Yes |
| Remote Control | Yes |
| Flame Technology | LED |
| Safety Features | Overheat protection |
| Product Type | Electric Fireplace |
To Next Page
