To Next PageTo Next PageWhat to do if Dimplex DWF3651 Indoor Fireplace doesn't turn on in Remote Mode?
If your Dimplex Indoor Fireplace doesn't turn on in Remote Mode, refer to the Operation Section for proper operation. Another reason could be that the remote control is not working, so try installing a new battery. Finally, a defective display or control board could be the reason; in that case, replace the display or control board.
Covers options for placing the fireplace unit on a wall or tabletop.
Guides on how to securely attach the fireplace bracket to wall studs.
Turns the unit ON and OFF using the remote or unit controls.
Controls the ON/OFF state of the flame effect.
Cycles through heat settings: Low Heat, High Heat, and Off.
Adjusts the temperature set point for heating requirements.
Allows disabling the heater function for seasonal use.
Manages different presets of ambient lighting color combinations.
Adjusts the brightness level of the unit's ambient lighting.
Sets an automatic shut-off timer for the fireplace.
Explains how to reset the heater if it overheats.
Instructions for replacing the battery in the remote control unit.
How to clean the partially reflective glass surfaces.
Instructions for cleaning the exterior surfaces of the fireplace.
Recommends professional service for repairs not covered in the manual.
Details the models and regions covered by the limited warranty.
Lists products or regions not covered by the limited warranty.
Specifies the duration and scope of the limited warranty coverage.
Outlines conditions and circumstances not covered by the warranty.
Provides steps for obtaining warranty service, including contact information.
Explains Dimplex's responsibilities for defective products under warranty.
Covers options for placing the fireplace unit on a wall or tabletop.
Guides on how to securely attach the fireplace bracket to wall studs.
Turns the unit ON and OFF using the remote or unit controls.
Controls the ON/OFF state of the flame effect.
Cycles through heat settings: Low Heat, High Heat, and Off.
Adjusts the temperature set point for heating requirements.
Allows disabling the heater function for seasonal use.
Manages different presets of ambient lighting color combinations.
Adjusts the brightness level of the unit's ambient lighting.
Sets an automatic shut-off timer for the fireplace.
Explains how to reset the heater if it overheats.
Instructions for replacing the battery in the remote control unit.
How to clean the partially reflective glass surfaces.
Instructions for cleaning the exterior surfaces of the fireplace.
Recommends professional service for repairs not covered in the manual.
Details the models and regions covered by the limited warranty.
Lists products or regions not covered by the limited warranty.
Specifies the duration and scope of the limited warranty coverage.
Outlines conditions and circumstances not covered by the warranty.
Provides steps for obtaining warranty service, including contact information.
Explains Dimplex's responsibilities for defective products under warranty.
General| Model | DWF3651 |
|---|---|
| Type | Electric Fireplace |
| Fuel Type | Electric |
| Voltage | 120V |
| Heating Area | Up to 400 sq. ft. |
| Flame Effect | Yes |
| Flame Technology | LED |
| Remote Control | Yes |
| Adjustable Thermostat | Yes |
| Overheat Protection | Yes |
| Style | Wall-Mount |
