Operational Warning Notes
1. The output voltage for the battery charger must not exceed 5V (1A, connection
to a higher power output port will damage the controller.
2. If the product is damaged or the fan is prevented from rotating freely by some
external interference the unit should be turned o immediately, failure to turn
the unit o in such circumstances will damage the internal controller chip and
probably the motor as well.
3. We recommend that the unit should be fully charged before each prolonged
operation.
4. We recommend that the product should not be used in High Speed mode while
connected to a charging port.
If dust accumulates, it will aect the performance, so it is recommended to clean
the fan at least once a month when in use.
1. Turn o the fan and unplug it from the USB cable.
Note: You must unplug the fan prior to cleaning, otherwise you will put yourself at
risk of electric shock.
2. Clean the surface of the fan with a damp cloth, avoid direct contact with water.
3. Do not use any detergent, spray or chemicals to clean the fan, these can
damage the appliance.
3. Do not immerse in liquid or expose to liquid splashes or drops.
1. When the fan is not use for an extended period of time, unplug it and store in
an enclosed space to prevent dust from building up.
2. Store the fan in a dry and cool space away from heat sources.
Technical Data
Cleaning
Storage
Model DXRCF
Rated Voltage DC5V
Rated Power 5W
Noise Level ≤45dB
Product Size 180mm×150.5mm×273.5mm
Weight Net Weight:0.445Kg
To Next Page
Loading...
