EasyManuals Logo

Dimplex EF830 User Manual

Dimplex EF830
22 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #13 background imageLoading...
Page #13 background image
13
EF830
In more detail . . .
Viewing the timer setting
1. Press the key.
2. Press the “+” or “-” key to check the power-on time of the set timers one by one.
3. To check the power-off time, press the “▲” key.
4. Press the “+” or “-” key to check the power-off time of the set timers one by one.
5. To delete selected setting, press the “C” key.
Activation timer
Press the key to activate the timer function.
NOTE: When the timer is active, the heating level must be manually selected.
If the heater function is not selected, only the ame effect goes on at the set
power-on time.
Automatic heating mode
Press the “IC” key to activate automatic heating mode. The “AUTO” icon appears on
the display. And this function has two effects:
1. Adaptive start
After the automatic heating mode is turned on, if the weekly timer is turned on and
in the standby mode, within 20 minutes before the scheduled start-up time, the
heater will make three corresponding heating methods according to the current room
temperature.
1) The room temperature is lower than the set temperature by around ≥10°C, the high
heating power will be turned on.
2) The room temperature is lower than the set temperature by around ≥5°C but
<10°C, the lower heating power will be turned on.
3) If the room temperature is less than around 5°C below the set temperature, the
heating will not be turned on.
2. Automatic heating
After turning on automatic heating mode, if the heater does not turn on the weekly timer;
or the weekly timer is turned on, and it is in the default heating period, the heater will also
make three corresponding heating methods according to the current room temperature:
1) The room temperature is lower than the set temperature by around ≥6°C, high
heating power will be turned on.
2) The room temperature is lower than the set temperature by around <6°C, lower
heating power will be turned on.
3) When the room temperature reaches or exceeds the set temperature, the heater
will stop heating.
NOTE: The working temperature in the automatic heating mode will be a little
different according to the different ambient room temperature.
Product function
5059340241678-EF830_A5_IM_GB-V03.indd 135059340241678-EF830_A5_IM_GB-V03.indd 13 13-05-2021 13:17:2913-05-2021 13:17:29

Other manuals for Dimplex EF830

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Dimplex EF830 and is the answer not in the manual?

Dimplex EF830 Specifications

General IconGeneral
BrandDimplex
ModelEF830
CategoryIndoor Fireplace
LanguageEnglish

Related product manuals