EasyManua.ls Logo

Dimplex EF830 - Thermal Protection and Cooling Procedures

Dimplex EF830
22 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
5
EF830
Getting Started . . .
The yellow-green wire must be connected to the terminal
marked with an earthing symbol.
WARNING! Never connect live or neutral wires to the
earth terminal.
WARNING! In order to avoid overheating, do not cover
the heater.
Thermal Cut-Out
>
CAUTION! This product has one non-self-resetting overheat
protection devices. In the event that the heater stops working
as a result of overheating take the following immediate steps:
Switch the electricity off at the socket or off the replace power
switch. Remove any objects that are covering the product.
> CAUTION! Do not touch the heater as it will be hot.
>
Set the heater switches to O (off position) and leave the
heater to cool. Once completely cool, reconnect the heater
and switch it on.
Safety information
5059340241678-EF830_A5_IM_GB-V03.indd 55059340241678-EF830_A5_IM_GB-V03.indd 5 13-05-2021 13:17:2513-05-2021 13:17:25

Other manuals for Dimplex EF830

Related product manuals