EasyManuals Logo

Dimplex PF3033HL Owner's Manual

Dimplex PF3033HL
18 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #12 background imageLoading...
Page #12 background image
12 www.dimplex.com
Operation
the Floating Display™ until the heater
is turned off or the ames are turned
back on.
4. Temperature Down: Decreas-
es the heat output.
Adjusted by repeatedly press-
ing the corresponding button on
the remote.*
• Indicated by setpoint tempera-
ture on the Floating Display™
decreasing and the speed of the
fan decreasing to reduce the
amount of heat being projected
into the room.**
5. Temperature Up: Increases
the heat output.
Adjusted by repeatedly press-
ing the corresponding button on
the remote.*
• Indicated by the setpoint on the
Floating Display™ increasing and
the speed of the fan increasing to
increase the amount of heat being
projected into the room.
* The rst time the button is pressed
the current temperature set point will
be displayed for 5 seconds.
** The temperature can be adjusted
from 5 °C to 30 °C (41 °F to 86 °F).
!
NOTE: Pressing and holding the
, then pressing , will toggle
between °C and °F.
6. Eco: Runs the heater in a
reduced wattage range when
activated.
Adjusted by pressing the cor-
responding button on the remote
when the heater is on.
• Indicated by the icon being illu-
minated on the Floating Display™
and the speed of the fan will
decrease proportionally.
7. Boost: Turns On/Off the
heater boost function. Runs the
unit at the full rated wattage.
Activated and adjusted by re-
peatedly pressing the correspond-
ing button on the remote.
• Indicated by the heater running
at full heat, for a predetermined
amount of time, to quickly heat
up a cold room/space. The Boost
can be set for a maximum of 20
minutes, in 5 minute increments.
8. Multi-Fire XD™: Different
presets of ambient lighting color
combinations contained in the
unit.
Changed by repeatedly press-
ing the corresponding button on
the remote.
• Cycles through the different
preset ambient lighting settings
of the unit, this includes different
combinations of colours of the top
lighting, ame base and media
lighting (if applicable).
!
NOTE: The last option is a per-
sonalized colour setting ("P"), where

Other manuals for Dimplex PF3033HL

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Dimplex PF3033HL and is the answer not in the manual?

Dimplex PF3033HL Specifications

General IconGeneral
BrandDimplex
ModelPF3033HL
CategoryIndoor Fireplace
LanguageEnglish

Related product manuals