To Next PageTo Next Page
Need help?Do you have a question about the Dimplex Prism 50 and is the answer not in the manual?
Review and consider conditions for unit installation, including dimensions and wall stud requirements.
Procedure for mounting the fireplace on the surface of a wall, including power connection options.
Steps for recessing the fireplace into a wall opening of specific dimensions and depth.
Instructions for flush mounting the fireplace into a wall opening of specified width and depth.
Guidance on installing the front glass assembly, including glass rocks and securing mechanisms.
How to turn the unit on/off using the standby button and its behavior upon activation.
Instructions for activating flame effects and cycling through heat settings (Low, High, Off).
Adjusting the temperature set point and understanding the heater's cycle for maintenance.
Changing ambient lighting presets and adjusting the brightness of the unit's lights.
Setting the automatic shut-off timer and procedures for resetting the temperature cutoff switch.
Steps for opening the remote, installing a new battery, and closing the cover.
Methods for cleaning the glass, removing dust, fingerprints, and avoiding scratches.
Using a damp cloth for cleaning painted surfaces without abrasive cleaners.
Guidance on authorized service representatives for any maintenance not covered in the manual.
Contacting dealers for service and information on proper product recycling within the EU.
Review and consider conditions for unit installation, including dimensions and wall stud requirements.
Procedure for mounting the fireplace on the surface of a wall, including power connection options.
Steps for recessing the fireplace into a wall opening of specific dimensions and depth.
Instructions for flush mounting the fireplace into a wall opening of specified width and depth.
Guidance on installing the front glass assembly, including glass rocks and securing mechanisms.
How to turn the unit on/off using the standby button and its behavior upon activation.
Instructions for activating flame effects and cycling through heat settings (Low, High, Off).
Adjusting the temperature set point and understanding the heater's cycle for maintenance.
Changing ambient lighting presets and adjusting the brightness of the unit's lights.
Setting the automatic shut-off timer and procedures for resetting the temperature cutoff switch.
Steps for opening the remote, installing a new battery, and closing the cover.
Methods for cleaning the glass, removing dust, fingerprints, and avoiding scratches.
Using a damp cloth for cleaning painted surfaces without abrasive cleaners.
Guidance on authorized service representatives for any maintenance not covered in the manual.
Contacting dealers for service and information on proper product recycling within the EU.
General| Model | Prism 50 |
|---|---|
| Type | Electric Fireplace |
| Size | 50 inches |
| Volts | 120V |
| Watts | 1500W |
| Amps | 12.5A |
| Heating Area | 400 sq ft |
| Flame Brightness Adjustment | Yes |
| Remote Control | Yes |
| Timer | Yes |
| Thermostat | Yes |
| Safety Features | Overheat protection |
| Height | 21.5 inches |
| Width | 50 inches |
| Depth | 5.5 inches |
| Color | Black |
| Color Options | Black |
| Installation | Built-in |
| Heat Settings | 2 heat settings |
| Material | Steel/Glass |
