22
Advanced Settings
These settings can be used to signifi cantly change the operation of the heater. While useful for very specifi c
requirements, there is a much higher risk of User error and unintended consequences of changing these settings
compared to the top-level settings menu. It is recommended that these settings are only modifi ed by trained
professionals.
To navigate to the Advanced settings menu, from the home screen:
Press and hold the Advance and Menu buttons for 3 seconds.
Each of the following headings relate to an item in the settings menu.
Temperature Settings
Temp Units (Temperature Units)
This setting defi nes which temperature units are displayed on the heater. The default is °C, but °F can be set. When
°F is selected, the heater will convert °C values to °F and round to the nearest number.
Service (Service Settings)
These items are for use by service personnel only. The settings e ect the e ect the accuracy and energy usage of
the heater and should only be modifi ed by a professional.
Room Temp (Temperature) O set
Allows the manual adjustment of electronic thermostat reading by +/-3.0°C
Factory Reset
This setting allows the User to restore the default values to all settings. Returning the product to the same state
that it left the factory.
To Next Page
Loading...
Need help?
General
