11
Timer Modes o er the most e cient mode of operation for a predictable heat demand. Additional functions such as
‘Advance’ and ‘Boost’ allow the User to make temporary adjustments to timer schedules for a more fl exible operation.
Each timer is broken down into 4 defi nable ‘Heating On’ time periods and temperatures per day, for each day of
the week. Each day consists of a 24-Hour period, starting and fi nishing at midnight.
‘Heating On’ periods are times when the heater is trying to achieve and maintain the target room temperature.
It is possible to change the Target Temperature of a Heating On period when that period is active. This will
temporarily adjust the Target Temperature for just that instance and will not permanently modify the settings for
the timer in use.
NOTE:
If Adaptive Start is enabled, the heater will maintain the room at the required
temperature for the duration of the heating period. To achieve this, the heater
will begin heating the room before the start of the heating period to ensure
the room is at the required temperature when the period starts.
If Adaptive Start (AS) is disabled, the heater will not operate until the
beginning of the heating period. This should be taken into consideration when
setting the heating periods.
See page 21 for instruction on enabling/disabling Adaptive Start.
ADVANCE
MENU
BACK
ENTER
Out All Day
21
°
C
Heating ON
Timer Modes
To Next Page
Loading...
Need help?
General
