- 19 -
Boost can be activated at any time, when the product is set to any Timer or Continuous heat mode; even if Advance
is active, this mode will provide a temporary ‘Boost’ of heat. For settings, see Boost settings on page 21.
Boost Mode can be activated from the Home Screen by pressing ‘Menu’ to access the Main Menu, then pressing the
Dial to select ‘Boost’. ‘Boost’ will always be listed as the top item on the list.
Boost Mode
Activating Boost will present two selectable options: Boost Temp (Boost Target Temperature) and Boost Time (Boost
Duration Countdown). The default values for these can be set in the Settings Menu.
Rotate and press the Dial to modify these values. Pressing Back will end Boost early, restoring the heater back to its
previously active mode.
• The Boost Temp can be set to any value within the Heater’s Target Temperature Range setting.
• The Boost Time can be increased in the following increments: 30 mins, 1 hour, 2 hours, 3 hours, 4
hours. These increments can be restricted with the Max. Boost Duration Range setting. To modify
this range, see Boost Settings on page 21.
Once the Boost Duration Countdown has reached 0, the Heater will return to the mode that was active before Boost
was activated.
NOTE:
If boost mode is activated and there is not enough stored core energy, peak
rate energy will be used unless disabled in heat source settings.
Main Menu
Boost
Modes
Settings
Main Menu
Boost Temp
25
°
C
Boost Time
0 Mins
Boost
Boost Temp
25
°
C
Boost Time
30 Mins
ADVANCE
MENU
BACK
ADVANCE
MENU
BACK
ADVANCE
MENU
BACK
To Next Page
Loading...
Need help?
General
