- 14 -
Timer Modes oer the most ecient mode of operation for a predictable heat demand. Additional functions such as
Advance and Boost allow the User to make temporary adjustments to timer schedules for a more flexible operation.
Each timer is broken down into 4 definable ‘Heating On’ time periods and temperatures per day, for each day of
the week. Each day consists of a 24-Hour period, starting and finishing at midnight.
When the heater is in a timer profile and trying to achieve or maintain a room temperature, ‘Heating On’ will be
displayed. Otherwise, ‘Heating O’ will be displayed.
It is possible to change the Target Temperature of a ‘Heating On’ period when that period is active. This will
temporarily adjust the Target Temperature for just that instance and will not permanently modify the settings for
the timer in use.
Timer Modes
NOTE:
If Adaptive Start is enabled, the heater will maintain the room at the required
temperature for the duration of the heating period. To achieve this, the heater
will begin heating the room before the start of the heating period to ensure
the room is at the required temperature when the period starts.
If Adaptive Start (AS) is disabled, the heater will not operate until the beginning
of the heating period. This should be taken into consideration when setting
the heating periods.
See page 22 for instruction on enabling/disabling Adaptive Start.
User Timer
21
°
C
Heating ON
ADVANCE
MENU
BACK
To Next Page
Loading...
Need help?
General
