Dimplex VCX1525 - Product Modification and Material Restrictions; Installation, Operation, and Storage Safety

5
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
NO USER-SERVICEABLE PARTS INSIDE
SAVE THESE INSTRUCTIONS
IMPORTANT INSTRUCTIONS
⑬ Do not modify the replace.
Use it only as described in this
manual. Any other use not
recommended by the manufacturer
may cause re, electric shock or
injury to persons.
⑭ This unit may have a
polarized plug (one blade is wider
than the other). The plug will t in
a polarized outlet only one way.
If the plug does not t fully in the
outlet, reverse the plug. If it still
does not t, contact a qualied
electrician to install the proper
outlet.
⑮ Do not change the plug in
any way. Avoid the use of an
extension cord. Extension cords
may overheat and cause a risk of
re. If you must use an extension
cord, the cord must be No. 14
AWG minimum size and rated no
less than 1875 Watts.
⑯ Do not burn wood or other
materials in the replace.
⑰ Do not strike the glass front.
⑱ Always use a certied
electrician for build-in hard-wired
installation.
⑲ Always use properly
grounded, fused and polarized
outlets.
⑳ Disconnect all main power
supply (unplug the unit or switch
off at main service panel) before
performing any cleaning,
maintenance or relocation of the
unit.
21
Do not operate the replace
without the glass assembly and/or
frame.
22
When transporting or storing
the unit and cord, keep in a dry
place, free from excessive
vibration and store so as to avoid
damage.
23
Do not put combustible
material, liquid, or small articles
such as sand inside glass
assembly.