Advance
Sometimes you may need to change the way you use your heating temporarily. This is achieved by
using the Advance function. The Advance function allows you to begin the next ‘Comfort’ mode early.
If the heater is in ‘Comfort O! ’
mode and you want heat – press the
Advance button. If the heater is in
‘Comfort On’ mode and you don’t
want heat, press the Advance button.
The heater’s change mode will go off
until the beginning of the next ‘Comfort’ period, then go back to the timed heating periods.
Which timer mode is best for me?
The heater leaves the factory set in User Timer mode. If you are in during the day then you should
use this mode. This mode will give you four periods of heating split throughout the day. If you are out
during the day and only require heat in the mornings and evenings then Out All Day mode will suit
your lifestyle.
If you are away for an extended period then you can use the Holiday mode. This allows you to reduce
the heating during the period that you are away, reverting to the previously selected mode on the day of
your return.
Please refer to the operating instructions for information on how to modify the programmed times.
Set the timer mode
Your XLE heater comes
pre-programmed with
three timer modes. User
Timer is default.
These modes defi ne the periods when the heater will operate in ‘Comfort On’ mode.
Timer Mode Description
User Timer (factory default) 11 hours heating per day in four periods
Out All Day 6.5 hours heating per day in two periods
Holiday Set the temperature and date of return from holidays
The three modes are:
Ma i n Me n u
Da t e/Ti m e
Mo d e
Op t ions
Mo d e
Ti m er
Bo o st
Se t back
Ti m er M o de
Us e r Ti m er
Ou t All Day
Ho l iday
Ou t All Day
Se l ect
Pre v iew
Mo d ify
Ou t All Day
Se l ecte d
Us er Tim e r
Co mfo rt O n
User Ti mer
Comfo rt On
Ad va nc e
07 :4 1
Co mf or t Off
Ne xt o n at
17 :0 0
To Next Page
Loading...
Need help?
General
