Section3-User Responsibility, Machine
Pre
aration and Ins
ection
Operation & Maintenance Manual
Dingli Machinery
3-8
4) Machine Log.
Ensure a machine operating record or log is kept, check to see that it is current and that no entries
have been left unlearned, leaving machine in an unsafe condition for operation.
5) Check platform footswitch for proper operation.
Switch must be released to start and depressed to operate machine.
6) Check that drive brakes hold when machine is driven up a grade not greater than specified on
the serial number placard and stopped.
7) Assure that all items requiring lubrication are serviced.
Refer to Figure 3-2, Daily Walk-around Inspection Position.
To Next Page
Loading...
Need help?
General
