DINGLI BA22ERT User Manual

Section3-User Responsibility, Machine
Pre
p
aration and Ins
p
ection
Operation & Maintenance Manual
Dingli Machinery
3-10
Walk-Around Inspection Checklist
1) Platform Assembly – No loose or missing parts, no visible damage. Lock bolts in place.
Footswitch in good working order not modified disabled or blocked.
2) Platform Control Console – Switches and levers return to neutral and are properly secured,
no loose or missing parts, no visible damage, decals/placards secure and legible, control
marking legible.
3) Jib Articulating Cylinder – No visible damage; pivot pins secure; hydraulic hoses
undamaged, not leaking.
4) Slave Cylinder – No visible damage; pivot pins secure; hydraulic hoses undamaged, not
leaking
5) Boom Sections/Uprights/Lift Cylinders and Master Cylinder – No visible damage; pivot
pins secure; hydraulic hoses undamaged, not leaking. Uprights in vertical position.
6) Wheel/Tire Assembly, Left Rear – Properly secured, no loose or missing lug nuts, no visible
damage.
7) Rear shaft – No visible damage, no loose or missing parts, hydraulic hoses undamaged, not
leaking through the plugs and fittings, and no damage or wear on the rod of the steering
cylinder.
8) Drive Motor – No visible damage and no wear on the cable.
9) Turret Bearing – No loose or missing hardware; no visible; evidence of proper lubrication; no
evidence of loose bolts or looseness between bearing or structure.
Swing Motor and Rotation Reduction Gear – No loose or missing hardware; no visible
damage; evidence of proper lubrication.
10) Battery – Proper electrolyte levels; cables tight, no visible damage or corrosion.
11) Center of rotors- No visible damage, hydraulic hoses undamaged, not leaking.
12) Ground Controls – Switches operable, no visible damage, decals secure and legible. The
control station won’t close down automatically if not be pushed down emphatically, while be
pulled up already.
13) Tilt Sensor – Switches operable; no visible damage.
14) Hydraulic Pump –Fixed tightly. No loose or missing parts, and no evidence of leakage.
15) Auxiliary pump– Fixed tightly. No loose or missing parts, and no evidence of leakage.
16) Wheel/Tire Assembly, Left Front – Properly secured, no loose or missing lug nuts, no
visible damage.
17) Oscillating cylinder—No visible damage; pivot pins secure; hydraulic hoses undamaged,
not leaking.
18) Wheel/Tire Assembly, Right Front – Properly secured, no loose or missing lug nuts, no
visible damage.

DINGLI BA22ERT Specifications

General

Brand	DINGLI
Model	BA22ERT
Category	Boom Lifts
Language	English