OPERATOR’S MANUAL with Maintenance Information
Maintenance
60
14 Add the tank with hydraulic oil until the
fluid is equal in the hydraulic tank. .
Component damage hazard.
The pump can be damaged if operated without
oil. Be careful not to empty the hydraulic tank
while in the process of filling the hydraulic
system. Do not allow the pump to cavitate.
E-2
Perform Engine Maintenance
Engine specifications require that this
procedure be performed every 2000 hours or
two years, whichever comes first.
Required maintenance procedures and
additional engine information is available in the
engine operator’s manual.
E-3
Perform Engine Maintenance
Engine specifications require that this
procedure be performed every 3000 hours,
Required maintenance procedures and
additional engine information is available in the
engine operator’s manual.
E-4
Perform Engine Maintenance
Engine specifications require that this
procedure be performed every 4000 hours,
Required maintenance procedures and
additional engine information is available in the
engine operator’s manual.
To Next Page
Loading...
