OPERATOR’S MANUAL with Maintenance Information
Function Tests
27
Test the Outrigger System
54 Push and hold the auto level button.
55 Press and hold the function enable switch.
Activate the proportional control handle in
the direction indicated by the yellow arrow.
⊙ Result: The outriggers will extend and level
the machine. A beep will sound when the
machine is level.
56 Push and hold the auto level button.
57 Press and hold the function enable switch.
Activate the proportional control handle in
the direction indicated by the blue arrow.
⊙ Result: The outriggers should retract and
return to the stowed position. A beep will
sound when the machine is in the stowed
position.
Test Auxiliary Lowering
58 Push and hold the function enable switch
and raise the platform approximately 60
cm.
59 Press the engine start/ flameout button to
engine off.
60 Push and hold the function enable switch.
Activate the control handle in the direction
indicated by the yellow arrow.
⊙ Result: The platform should lower.
Test Platform extendable / retractable
Functions
61 Push and hold the Power platform button.
Press and hold the function enable switch.
Activate the proportional control handle in
the direction indicated by the blue arrow
⊙ Result: The platform should extend.
62 Push and hold the Power platform button.
Press and hold the function enable switch.
Activate the proportional control handle in
the direction indicated by the yellow arrow.
⊙ Result: The platform should retract.
To Next Page
Loading...
