OPERATOR’S MANUAL with Maintenance Information
Operating Instructions
30
Error indicator readout
The LED readout screen displays fault codes that provide information about the
machine operating status and about malfunctions. The fault codes listed in the
following charts describe malfunctions and can aid in troubleshooting the machine
by pinpointing the area or component affected.
List of Fault Codes
Display Description Lift Reaction
01 System initialization Fault Disables All Motion
02 System communication Fault Disables All Motion
03 Invalid option setting Fault Disables All Motion
12 Chassis Up/Down Switch ON at Power-up Fault Disable Chassis Control
18 Pothole Guard Fault Disable Lifting and Driving
31 Pressure Sensor Fault Disables All Motion
32 Angle Sensor Fault Disables All Motion
36 Low Battery Alert Warning Only
42 Platform Left Turn Switch ON at power-up Message Warning Only
43 Platform Right Turn Switch ON at power-up Message Warning Only
46 Platform Joystick Enable Switch ON at power-up Fault Disable Platform Control
47 Platform Joystick not in neutral at power-up Message Warning Only
52 Drive Forward Coil Fault Disable Lifting and Driving
53 Drive Reverse Coil Fault Disable Lifting and Driving
54 Lift Up Coil Fault Disable Lifting and Driving
55 Lift Down Coil Fault Disable Lifting and Driving
56 Right Turn Coil Fault Disable Lifting and Driving
57 Left Turn Coil Fault Disable Lifting and Driving
58 General Brake Coil Fault Disable Lifting and Driving
59 Parallel Coil Fault Disable Lifting and Driving
61 Motor Controller Current Sensor Fault Controller Dependent
To Next Page
Loading...
Need help?
General
