Dingtek DF702 - 7.4.6 Open Hyperterm Software

Beijing Dingtek Technology Corp., Ltd. Tel:86-10-64718863, 64753700
http://www.dingtek.com E-mail: service@dingtek.com
Room A209, Flounder Business Park, Shunbai Road 12, Chaoyang District, Beijing, China 100022 Page
28
Figure7.9
7.4.6 Open the software Hyperterm exe as shown in Figure7.10 dialog box, enter 1 in the
name bar, and click OK Figure7.11.
You can see Figure 7.12 dialog box, select the desired serial port, in Figure selected port is
such as COM16, and then click OK.
The Figure7.13 dialog box appears selects the following steps in dialog box.

Select baud rate: 115200
 Parity: None

Data Bits: 8
 Stop Bits: 1

Data Flow Control bits: 1
After selecting the dialog box then Click OK.