Dingtek DF702 - 6.3 Use Serial Software for Configuration

Beijing Dingtek Technology Corp., Ltd. Tel:86-10-64718863, 64753700
http://www.dingtek.com E-mail: service@dingtek.com
Room A209, Flounder Business Park, Shunbai Road 12, Chaoyang District, Beijing, China 100022 Page
18
Figure6.6
6.3 Use serial software to configure

Open the serial software
 Select the serial port number

Set the baud rate: 115200
 Parity bit: NONE

Data bits: 8
 Stop bit: 1
 Connect the device's power
When you see the serial port output sending instructions are in Hexadecimal then we
will change the format of serial software sending option .
Data is sent in hexadecimal format (please refer to instruction format for details) .