1
U N P A C K IN G
Always have assistance when lifting
the generator. The generator is heavy;
lifting it could cause bodily harm.
Avoid cutting on or near staples to
prevent personal injury.
Tools required - box cutter or similar device.
1. Carefully cut the packing tape on top of the carton.
2. Remove socket wrench, and oil funnel and save for
later.
3. Carefully cut two sides of the carton to remove the
generator.
WHAT COMES IN THE BOX
Spark Plug Socket Wrench (1)
Dual-Purpose Screwdriver (1)
User Manual (1)
Warranty Information (1)
Funnel (1)
30A 120V L5-30P to TT-30R Plug Adapter (1)
Generator Cover (1)
Thank you very much for choosing generator set product manufactured by our Company!
This Manual will instruct you how to operate and use the generator set safely and properly.Please be sure
to read it carefully before using.
All technical data and diagrammatic presentations in this User’s Manual are consistent with the latest
product at the time of publication.
Due to the revision and other changes, contents of this Manual may be slightly different from actual
situation. The Company is entitled to revise it at any time, and the revised version will be developed
without prior notice, please understand that. The copyright of this User's Manual belongs to the Company,
and this Manual is not allowed to be reproduced without written consent of the Company, violators must be
prosecuted.
This Manual is a permanent part of the generator set. If the generator set is resold, the Manual will be
resold together with the generator set.
This manual contains important instructions for operating this inverter generator. For your
safety and the safety of others, be sure to read this manual thoroughly before operating the
generator. Failure to properly follow all instructions and precautions can cause you and others
to be seriously hurt or killed.
To Next Page
Loading...