21
STORAGE AND TRANSPORT
Unscrew oil dipstick, and drain oil in the crankcase off. Fill new oil to upper oil limit, and then assemble
oil dipstick.
8.
Gently pull startup handle until you feel resistance, allowing both inlet valve
and exhaust valve to be closed.
9.
Place the generator set in a clean and dry area.
10.
Generator transport
2
• When the generator set is transported, it shall be ensured that there is no fuel spilling;
• Do not fill excessive fuel into fuel tank;
• Do not run the generator, and avoid direct sunlight;
• Do not transport the generator set on rough road for long time.
To Next Page
Loading...
