9
© 2007 Directed Electronics - all rights reserved
for three full cycles (one-and-one-half minutes), the doors will be
bypassed until the trigger ceases.
nnoottee::
Arming and disarming the system does not reset this
function! The only ways to reset a bypassed zone are for it
to not trigger for 60 minutes or to turn on the ignition. If test-
ing your system, it is important to remember that this circuitry
can cause zones to be bypassed and appear to stop work-
ing. If five chirps are heard when disarming, false alarm pro-
tection has engaged. If you wish to clear the memory, turn
the ignition key on.
To Next Page
Loading...
