Need help?Do you have a question about the Directed Electronics 10 and is the answer not in the manual?
General| Brand | Directed Electronics |
|---|---|
| Model | 10 |
| Category | Car Alarm |
| Language | English |
Covers arming, triggered sequence, and disarming procedures for the VRS system.
Details the functions assigned to each button in the standard configuration.
Emphasizes that the system must be installed by an authorized dealer to maintain warranty.
Explains initial standard setup and customization options for transmitters.
Describes how to use specific buttons for functions like Silent Mode, Panic, and Auxiliary Outputs.
Explains how to activate auxiliary outputs using transmitter button combinations.
Details active and passive arming procedures.
Describes how to select different security levels during arming.
Explains standard disarming and high security disarm.
Provides steps to disarm using the Valet button.
Lists optional outputs like trunk release and window control.
Explains bypass notification chirps that occur during system arming.
Interprets Tamper Alert and NPC® bypass indications upon disarming.
Deciphers siren chirp patterns to understand system status.
Explains zone numbers, LED flashes, and how to interpret zone diagnostics.
Describes code hopping technology for enhanced security and transmitter synchronization.
Allows custom settings for up to four users via the Bitwriter.
Covers settings for arming, confirmation chirps, and ignition-controlled locks.
Details options like panic mode, forced passive arming, and AED.
Configures trigger response duration and Nuisance Prevention Circuitry.
Sets Valet pulse count and customizes siren tones/volume.
Lists options like progressive unlocking and Vehicle Recovery System.
Covers entering, adjusting, and exiting shock sensor sensitivity settings.
Procedure to restore the shock sensor to its default setting.
Details sensors and modules like Audio, Backup Battery, and Field Disturbance.
Lists features such as Power Trunk Release, Window Control, and Valet Start.
Provides definitions for key system components like Control Unit, LED, and Siren.
Defines terms related to system operation like Trigger, Valet Button, and Zone.
Summarizes key commands for arming, disarming, Valet, and Panic modes.
To Next Page