To Next PageTo Next Page
Need help?Do you have a question about the Directed Electronics Viper 5601 and is the answer not in the manual?
General| Type | Car Alarm with Remote Start |
|---|---|
| Remote Start | Yes |
| Keyless Entry | Yes |
| Two-Way Communication | Yes |
| Range | 1 mile |
| Shock Sensor | Yes |
| Panic Mode | Yes |
| LED Status Indicator | Yes |
| Number of Buttons on Remote | 5 |
| Display Type | LCD |
| Engine Immobilizer | Yes |
| Door Lock Control | Yes |
| Trunk Release | Yes |
| Starter Kill | Yes |
| Battery Backup | Yes |
| Compatibility | Universal |
| Alarm Features | Starter Kill |
Essential safety precautions for installation and operation to prevent hazards.
Visual layout of the control center and its primary connection points.
Specific wire assignments for main, H2, H3, and door lock harnesses.
Adjusting sensors, initializing Virtual Tach, and learning tach signal.
Testing neutral safety switch and pairing remote controls.
Instructions for accessing and modifying system features via menus.
Detailed breakdown of configurable features by menu type.
Configuration options for security functions.
Configuration options for convenience functions.
Configuration options for remote start functions.
Extended system options programmable via the Bitwriter tool.
Interpreting LED flashes to diagnose remote start issues.
Resolving common alarm system issues and sensor problems.
Diagnosing shock sensor and door input malfunctions.
Identifying and resolving problems with remote start activation and running.
Solutions for no-start, immediate shutdown, or continuous running.
Troubleshooting specific issues with MTS mode.
Steps for resetting features, deleting remotes, or clearing Virtual Tach data.
Process to remove all paired remote controls from system memory.
Restoring system features to their original factory default settings.
Clearing learned Virtual Tach data for re-initialization.
How to access and view stored trigger event history.
