Need help?Do you have a question about the Directed Electronics VIPER 5701 and is the answer not in the manual?
General| Brand | Directed Electronics |
|---|---|
| Model | VIPER 5701 |
| Category | Car Alarm |
| Language | English |
Provides guidance on system installation, warranty, and accessing the manual online.
Details how to obtain additional remote controls for the system.
Explains how the remote indicates when it's out of the vehicle's communication range.
Describes how the remote signals a low battery status.
Provides instructions on how to replace the remote's batteries.
Details how to adjust the sensitivity of the shock sensor via the remote or dealer.
Explains changes in how AUX outputs are numbered and accessed.
Critical safety precautions for operating the remote start system, especially in enclosed spaces.
Details how to arm the system without audible confirmation chirps.
Explains how the 2-way remote receives alarm notifications.
Instructions to temporarily disable the Warn Away alert feature.
Instructions to temporarily disable shock and optional sensors.
Siren is disabled; only remote paging alerts occur for triggers.
Siren is disabled for sensor triggers; entry points still trigger siren.
Procedure to disarm the system using the override switch.
Important steps and considerations before using the remote start feature.
How to check the remaining run time of the remote start.
Procedure to take manual control of the vehicle after remote start.
Allows the engine to run for a set period after parking to cool the turbo.
How the rear defogger activates with remote start or manually.
Prevents starter damage by disengaging the starter during remote start.
How to temporarily disable the remote start function for servicing.
Explains system feedback (chirps) during arming, including bypass notification.
Details siren chirps for arming, disarming, and tamper alerts.
How to understand zone triggers indicated by LED flashes.
System state is stored in memory and recalled after power loss.
System enters low power mode when armed or in Valet Mode.
Remote conserves power by disabling paging if unused for 72 hours.
To Next Page
