Directed Electronics 3100 - User Manual

Model 3100
Installation Guide
This product is intended for installation by a professional
installer only! Attempts to install this product by a person other
than a trained professional may result in severe damage to a
vehicle’s electrical system and components.
© 2011 Directed Electronics, Vista, CA
N3100 2011 - 12

Directed Electronics 3100 Specifications

General

Brand	Directed Electronics
Model	3100
Category	Car Alarm
Language	English

Summary

Wiring Connections

Main Harness 12-pin Connector (H1)

Details wiring for the 12-pin main connector (H1), including wire colors and functions.

Door Lock, 3-Pin Connector (H2)

Explains the 3-pin connector (H2) for door lock control and its wiring.

Horn Honk, 3-pin connector

Describes the 3-pin connector for horn honk output and its functionality.

Starter Interrupt Harness (H3)

Internal Programming Jumper

Light Flash

Remote Control Programming

Function Table

Lists valet button presses required for various system functions and remote configurations.

System Feature Programming

Feature Table

Provides a table mapping valet button presses to LED ON/OFF options for system features.

Feature Descriptions

Active;Passive Arming

Explains the automatic and manual arming modes of the system.

Confirmation Chirps

Ign-controlled Locking

Active;Passive Locking

Door Lock Pulse

Double Pulse Unlock

Double Pulse Lock

Comfort Closure

Troubleshooting