10
© 2011 Directed Electronics. All rights reserved.
remote to set the feature to the LED On option. To set the LED
Off, while still holding the Valet button, press
.* (See Feature
Table)
5. Release the Valet button to exit programming, or repeat the above
to program more features.
* Press
or AUX on the 3-button remote to set the feature to
the LED Off option.
Exit Programming
The siren emits one quick chirp, and then another lengthier chirp when exiting.
Programming is exited when one of the following occurs:
• Turn ignition ON
• Close the doors
• Press Valet button too many times
• 15 seconds or more lapses between steps
Feature Table
Valet but-
ton presses
(Chirps/
Flashes)
LED ON OPTION*
1 chirp
LED OFF OPTION
2 chirps
1
Active Arming
Passive Arming
2
Confirmation Chirps ON
Confirmation Chirps OFF
3
Ign-controlled Locking ON
Ign-controlled Locking OFF
4
Active Locking
Passive Locking
5
0.8 Second Doorlock Pulse
3.5 Second Door Lock Pulse
6
Double Pulse Unlock OFF
Double Pulse Unlock ON
7
Code Hopping ON
Code Hopping OFF
8
Door Trigger Error Chirp ON
Door Trigger Error Chirp OFF
9
Double Pulse Lock OFF
Double Pulse Lock ON
To Next Page
Loading...
Need help?
General
