To Next PageTo Next Page
Need help?Do you have a question about the Directed Electronics Viper 4704 and is the answer not in the manual?
General| System Type | 2-Way Security and Remote Start System |
|---|---|
| Channels | 4 |
| Remote Start | Yes |
| Keyless Entry | Yes |
| Shock Sensor | Yes |
| Panic Mode | Yes |
| LED Status Indicator | Yes |
| Two-Way Communication | Yes |
| Number of Buttons on Remotes | 5 |
| Operating Range | Up to 1 mile |
| 2-Way Paging | Yes |
| Range | Up to 1 mile |
| LCD Display | Yes |
| Starter Kill | Yes |
| Door Lock Control | Yes |
| Trunk Release | Yes |
| Valet Mode | Yes |
| Remote Start Ready | Yes |
| Auxiliary Outputs | 2 |
| Type | Car Alarm System |
Details the connections for the 6-pin main harness.
Details the connections for the 24-pin auxiliary/shutdown harness.
Details the connections for the 8-pin remote start harness.
Details the connections for the 3-pin door lock harness.
Guides on programming the Virtual Tach for engine monitoring.
Instructions for teaching the system the vehicle's tachometer signal.
Procedure to test the neutral safety switch for proper remote start operation.
Details features related to vehicle integration and locking.
Details features related to convenience functions and outputs.
Details features related to remote start operation and timing.
Procedure for deleting remotes or resetting system features.
Addresses common issues with the keyless entry system operation.
Addresses common issues preventing remote start activation or proper running.
Diagnoses issues specific to manual transmission remote start operation.
Explains causes for MTS mode exiting prematurely.
