17
© 2005 directed electronics, inc. all rights reserved
glossary of terms
Control Module: The “brain” of your system. Usually hidden under-
neath the dash area of the vehicle. It houses the microprocessor which
monitors your vehicle and controls all of the alarm’s functions.
Failsafe
®
Starter Kill (if equipped): An automatic switch controlled by
the security system which prevents the vehicle’s starter from cranking
whenever the system is armed. The vehicle is never prevented from
cranking when the system is disarmed, in Valet Mode, or should the
starter kill switch itself fail. Your system is ready for this feature, how-
ever installation of this feature may require additional labor.
Input: Any physical connection to the security system. An input can be
provided through a sensor, pinswitch or by existing systems in the vehi-
cle, such as ignition or courtesy lights.
Integrated LED/Valet button: A small push-button switch with an
integrated Red LED mounted somewhere in the vehicle. The button is
used to override the alarm when a transmitter is lost or damaged, or to
put it into Valet Mode. The LED indicates the status of your system. It
is also used to report triggers and faults in the system or sensors. This
switch is also used to program optional features.
Warn Away
®
Response: Light impacts to the vehicle generate the
Warn Away
®
Response, which consists of several seconds of horn
chirps and flashing parking lights.
Zone: A zone is a separate input that the alarm can recognize as
unique. Each input to the system is connected to a particular zone.
Often, two or more inputs may share the same zone.
To Next Page
Loading...
Need help?
General
