Directed Electronics Automate AM5 User Manual

19
© 2005 directed electronics, inc. all rights reserved
QQUUIICCKK RREEFFEERREENNCCEE GGUUIIDDEE::
TToo aarrmm tthhee ssyysstteemm
■ To arm the system, press the button on your transmitter. When the
system arms, your will hear a short horn honk, see the parking lights
flash once, and the doors will lock.
TToo ddiissaarrmm tthhee ssyysstteemm
■ To disarm the system, press the button on your transmitter. You will
hear two short horn honks, the parking lights will flash twice, and the
doors will unlock.
DDiissaarrmmiinngg wwiitthhoouutt aa ttrraannssmmiitttteerr
■ Turn on the ignition. Press the integrated LED/Valet button the pro-
grammed number of times within 10 seconds. The system should now
disarm. If it does not, you may have waited too long. Turn the ignition
off and on and try again.
TToo eenntteerr oorr eexxiitt VVaalleett MMooddee
■ Turn ignition to “run” position, then turn to “off” position. Press and
release the integrated LED/Valet button within 10 seconds. The status
LED will light solid if you are entering Valet Mode, and it will go out if
you are exiting Valet Mode.
RReemmoottee VVaalleett
■ Open any door. Press the button on your transmitter. Within one
second, press the button on your transmitter. Within one second,
press the button on your transmitter again. The status LED will stay
on if you have entered Valet Mode, and it will go out when exiting Valet
Mode.
PPaanniicc MMooddee
■ To enter Panic mode, press the button on your transmitter. The horn
will sound and the lights will flash for 30-seconds. To stop panic mode
press the , , or button on your transmitter.
CCuutt aalloonngg ddootttteedd lliinnee aanndd ffoolldd ffoorr aa qquuiicckk aanndd eeaassyy rreeffeerreennccee ttoo kkeeeepp iinn yyoouurr ppuurrssee oorr wwaalllleett..
✂✂
✂✂

Directed Electronics Automate AM5 Specifications

General

Brand	Directed Electronics
Model	Automate AM5
Category	Security System
Language	English