© 2004 Directed Electronics, Inc. Vista, CA
2233
5.
RReelleeaassee..
Release the Valet®/Program switch.
TToo aacccceessss aannootthheerr ffeeaattuurree::
You can advance from feature to feature by pressing and releasing the Valet
®
/Program switch the number of times
necessary to get from the feature you just programmed to the feature you wish to access. For example, if you
just programmed Feature 1 and you want to program Feature 2:
1. Release the Valet
®
/Program switch.
2. Press and release the Valet/Program switch once to advance from Feature 1 to Feature 2.
3. Press the Valet
®
/Program switch once more and
HHOOLLDD
it.
4. The siren will chirp two times to confirm that you have accessed Feature 2.
TToo eexxiitt tthhee CCooddee LLeeaarrnniinngg,, ddoo oonnee ooff tthhee ffoolllloowwiinngg::
■ Close the open door.
■ Turn the ignition on.
■ No activity for longer than 15 seconds.
■ Press the Valet®/Program switch too many times.
ffeeaattuurreess mmeennuu
FFEEAATTUURREE DDEEFFAAUULLTT LLEEDD OONN SSEETTTTIINNGGSS LLEEDD OOFFFF SSEETTTTIINNGGSS
NNUUMMBBEERR ((PPRREESSSS TTRRAANNSSMMIITTTTEERR BBUUTTTTOONN II)) ((PPRREESSSS TTRRAANNSSMMIITTTTEERR BBUUTTTTOONN IIII))
1
AAccttiivvee AArrmmiinngg
Passive Arming
2
CCoonnffiirrmmaattiioonn CChhiirrppss OONN
Confirmation Chirps OFF
3
IIggnniittiioonn--CCoonnttrroolllleedd
Ignition-controlled
DDoooorr LLoocckk//UUnnlloocckk OONN
Door Lock/Unlock OFF
4
AAccttiivvee LLoocckkiinngg
Passive Locking
5
00..88--sseeccoonndd DDoooorr LLoocckk PPuullssee DDuurraattiioonn
3.5-second Door Lock Pulse Duration
6
DDoouubbllee PPuullssee UUnnlloocckk OOFFFF
Double Pulse Unlock ON
7
SStteeaalltthh CCooddiinngg™™ TTeecchhnnoollooggyy OONN
Stealth Coding™ Technology OFF
8
DDoooorr ttrriiggggeerr eerrrroorr cchhiirrpp OONN
Door trigger error chirp OFF
9
LLoocckk ppuullssee SSiinnggllee
Lock pulse Double
10
CCoommffoorrtt cclloossuurree OOFFFF
Comfort closure ON (20-seconds)
NNOOTTEE::
Factory defaults are indicated in
bboolldd
type.
To Next Page
Loading...
Need help?
General
