User guide P.21
Home Valet
TM
Mode
If configured at installation, this feature will remotely set the vehicle to a no-
remote-start mode: if the vehicle is parked indoors there is no danger of it starting
accidentally by remote control. If the vehicle has a manual transmission, it should
be set into ready mode before activating the Home Valet™.
Note: Once the Home Valet Mode is activated, the vehicle will not start by
remote, but the OEM alarm functions will remain active.
To take the system into home valet mode:
8. Press the or button.
9. Within 3 seconds, press the and buttons
simultaneously for 3 sec.
10. The P-lights will flash once
To take the system out of home valet mode:
Turn the ignition key to the IGNITION ON (RUN) position.
The system will warn you if someone attempts to start your vehicle while
it stands in home valet mode. The parking lights will:
Turn ON then OFF; then
Flash twice, pause; then
Flash twice again.
AUX 1
Note: This 500 mA negative AUX 1 output can be used for many different
applications
Priority door:
This great feature allows the user to unlock solely the driver’s door with a single
press of the button on the transmitter, and to unlock the other doors,
if desired, by pressing the button for a second time.
To Next Page
Loading...
Need help?
General
