112
DIRECTV
®
NON-DVR USER GUIDE
To use your DIRECTV HD Receiver on your home network, you will need:
The instructions for connecting to a network are different depending upon whether you have Whole-Home DVR Service.
Please see the appropriate sections that follow.
If you have Whole-Home DVR service:
Professionally Installed Cinema Connection Kit: Schedule a professional installation appointment at directv.com/getconnected. This
is the only option available for customers with Whole-Home DVR service.
If you do not have Whole-Home DVR service:
Wired: The fastest, most reliable connection. Your house must be wired for Ethernet, or you must run cables from a network
router to your DIRECTV HD Receiver.
Wireless: This can be easiest method if you already connect to the Internet via Wi-Fi. However, wireless connections may be
slower and somewhat less reliable than wired.
A compatible DIRECTV Receiver, such as the DIRECTV HD Receiver (models H21 or later), DIRECTV Plus
®
HD DVR Receiver (models
HR20 or later) or DIRECTV Plus
®
DVR (model R22). Model H25 can only be connected using Whole-Home DVR service.
A broadband Internet connection, with a minimum connection speed of 750 kbps or higher (DSL or cable).
A network router with an available Ethernet port.
How to Network your HD Receiver
Note: For the most current options and instructions to connect your Receiver to the Internet, please visit directv.com/getconnected.
Appendix 2: How to Network Your HD Receiver (High-Definition Receivers)
To Next Page
Loading...
