DirecTV PLUS DVR - MANUEL 2 - Factory Defaults

73
DIRECTV Plus
®
DVR - User Guide
Factory Defaults
To reset all the functions of the remote control to the factory defaults, follow these steps:
1) Point the remote away from your DIRECTV Plus DVR and components. Press and hold MUTE and
SELECT until the light above the slide switch on the remote fl ashes twice (about 5 seconds).
2) Enter 9-8-1.  e light on the remote will fl ash twice, indicating you have cleared AV1, AV2 and TV
modes.
R16 UG Book.indb 73R16 UG Book.indb 73 10/29/07 2:51:58 PM10/29/07 2:51:58 PM