COMPACT
Air conditioning for vehicles
11
EN
When selecting
F4
,
CA
will be shown on display. Through this function, equipment
automatically regulates and controls the comfort temperature working on the fan speed and
the compressors revolutions. Pressing the button
rom the remote control, cancel the
function
F4
and it comes to
F0
(Manual Function). At the rst start of the unit start with
F4
with the parametres xed by the factory.
To activate this function, keep the On/Off
key pressed down until the display shows
F6
, and then release the key to directly enable ºF. To return to ºC, keep the
key on the
control panel pressed down with the display flashing
C
C
, when it stops flashing, press
the key on the control panel. The control is disabled when carrying out this operation,
meaning it must be registered again once nished.
Function
F4
-
Automatic functioning of equipment
Function
F6
-
ºF Selection
To Next Page
Loading...
