TROUBLESHOOTING GUIDE
Problem
Cleaner won't run
Cleaner won't pick-up
or low suction
Dust escaping from cleaner
Cleaner tools won't pick up
Headlight not working
Cleaner is difficult to push
Belt burns or breaks
IMPORTANT: UNPLUG CLEANER BEFORE
Possible Reasons
1.
Power cord not firmly plugged into outlet.
2. Blown fuse or tripped breaker.
3. Needs service.
4.
Motor Protector trimed.
1. Paper bag is not opened.
2. Paper bag full.
3. Brushroll worn.
4. Broken or worn belt.
5.
Clogged filter pad.
6.
Nozzleldirt passage clogged.
7.
Carpet height setting is incorrect.
8. No paper bag.
9.
Bag inlet clogged.
1. Paper bag full.
2. Bag not installed correctly.
3.
Puncture/hole in paper bag.
4. No bag in cleaner.
5.
Hose not installed correctly.
1.
Hose clogged.
2.
Bag inlet clogged.
3. Paper bag full.
4. No bag in cleaner, filter clogged.
1. Bulb burnt out.
2. Loose electrical wires.
1. Carpet height setting is incorrect.
1. Brush may be jammed with debris.
2. Brush End Caps are clogged with debris.
3. Carpet Height Setting is incorrect.
4. Belt is broken.
f
RVlClNG
Possible Solutions
1.
Plug unit in firmly.
2. Check fuse or breaker in home. Replace fuseheset breaker.
3. Take to service center or call 1-800-321 -1 134.
4.
Cloa indicator liaht
-
Pa. 3.
1. Insert finger into hole and push paper away from opening.
2. Replace paper bag
-
Pg.
7.
3.
Replace brushroll
-
Pg. 8.
4. Replace belt
-
Pg. 8.
5.
Replace filter
-
Pg.
7.
6.
Remove base nozzle cover
-
Pg. 8; remove obstruction OR
Remove hose; remove obstruction
-
Pg.
5.
7.
Set carpet height adjustment to appropriate
setting for carpet being cleaned
-
Pg.
6.
8. Clean filter
&
install bag
-
Pg.
7.
9.
Remove hose
&
DaDer baa and clean inlet
-
Pq.
5,7.
1. Replace paper bag
-
Pg.
7.
2. Review paper bag installation
-
Pg.
7.
3. Replace paper bag
-
Pg.
7.
CleanlReplace Filter
-
Pg.
7.
4. Install bag
&
clean filter
-
Pg.
7.
5.
Review Hose Installation
-
Pg.
5.
1.
Remove hose and tools; remove obstruction
-
Pg.
5.
2. Remove hose
&
paper bag and clean inlet
-
Pg.
5,7.
3. Replace paper bag
-
Pg.
7.
4. Install paper bag
&
clean filter
-
Pg.
7.
1.
Replace bulb
-
Pg. 8.
2. Call 1-800-321-1 134 for nearest authorized RoyaP Dealer.
1. Set carpet height adjustment to appropriate
setting for carpet being cleaned
-
Pg.
6.
1. Remove brush
-
Pg. 8. Clean brush of debris.
2. Remove brush. Determine if End Caps rotate freely. If
not, replace brushroll
-
Pg. 8.
3.
Set Carpet Height adjustment to appropriate setting for
carpet being cleaned
-
Pg.
6.
4. Replace belt
-
Pg. 8.
ANY OTHER SERVICING SHOULD BE DONE BY AN AUTHORIZED SERVICE REPRESENTATIVE
CUSTOMER SERVICE
(1 -800-321 -1 134)
In the event that further assistance is required, see your Yellow Pages for an authorized Royala Dealer. Costs of any transportation to and from any place of repair are
to be paid by the owner. The service parts used in this unit are easily replaced and readily available from an authorized Royal" Dealer or retailer. Always identify your
cleaner by the model number and manufacturing code when requesting information or ordering replacement parts. (The model number appears on the back of the
cleaner.)
To Next Page
Loading...