DISCOVER D904 - Connecting handset lifter; Connecting to computer via USB; Wearing style

2.3 Connecting to a DHL110 handset lifter (sold
separately)
• Fit the handset lifter to your telephone as
indicated in its user guide.
• Connect the handset lifter to the ‘AUX’ port (12)
located on the back of the headset base.
With the handset lifter connected, you will be able
to answer and end calls using the button located on
the headset while away from your desk.
2.4 Connecting to a computer USB port
• Connect the USB cable supplied with the
product to the ‘USB’ port (11) on the back of
the headset base and to a available USB port
on your computer.
• The computer should automatically recognise
the device and install the correct drivers.
2.5 Wearing style
Your Discover D904 headset is supplied
with a headband and an earhook.
• Headband
This can be attached to the headset to allow
for either left or right ear wearing and the size
can be adjusted to allow the user to nd the
most comfortable t.
• Earhook
This can also be used on either the left or
right ear.
To remove the headband or earhook: put your
thumb on the speaker and carefully pull the
headband or earhook with your other hand
towards you.
headsetadvisor.com | 1-800-683-5715