Need help?Do you have a question about the DISCOVER Adapt 30 and is the answer not in the manual?
Procedure for removing headset and accessories from packaging. Retain box for storage or repair.
Use only with CE ACA and RoHS approved equipment to maintain warranty.
Replace consumable items like ear cushions every 6 months for optimal performance.
Dispose of headset at approved recycling locations, not household waste.
Electrical safety, hearing protection, and child safety precautions for headset use.
Headset auto-configures to desk phone; use compatibility switch if no dial tone.
Flexible boom arm positioning for optimal voice capture, approx. 30mm from mouth.
Adjust speaker volume and mute microphone using controls on the headset boom arm.
Connect supplied cord to TEL port on base and HEADSET port on desk phone.
Unplug handset, use handset cable on base, and telephone cord to desk phone's HANDSET port.
Select '1' or '2' on the base unit until a dial tone is heard.
Steps to pair a headset to the base unit, indicated by LED lights and confirmation beep.
Process to add a second headset to an existing base station and manage calls.
Functionality related to Bluetooth module insertion.
Functionality related to USB cartridge insertion for PC or phone connection.
Button to mute the call.
Adjust speaker and microphone volume levels.
Select '1' or '2' for dial tone via telephone connection.
Steps to disable auto-talk, requiring manual call accept.
Steps to enable auto-talk, activating calls upon headset removal.
Procedures for terminating conference calls from either headset.
Connects headset wirelessly to Bluetooth-enabled smartphones and devices.
Remotely lifts desk phone handset for answering or initiating calls.
Enables answering/ending calls using headset's On/Off button.
Optional method for charging the headset via micro USB port.
To Next Page
General
