EasyManua.ls Logo

Dish Network 322 - Using Timers

Dish Network 322
137 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Chapter 3
Page 52
Using the System
Using Timers
Event timers let you set up the receiver to tune in future programs and/or
record them on a VCR (TV1 only). An “event” is a program, sports event,
pay per view movie, or anything else on satellite TV.
You can set an automatic event timer for a program listed with start
and stop times in the
Program Guide. This can be a program that
comes on each day or each week.
A manual event timer lets you set custom start and stop times for a
timer.
Note: If you want to have the Event Timer record to a VCR, you
must set up the receiver to control the VCR (see page 57).
Event Timer Types
Reminder - Reminds you that a program is about to start.
Auto-Tune - Reminds you that a program is about to start and tunes the
receiver to the program when it begins.
VCR - Reminds you that a program is about to start, tunes the receiver to the
program when it begins, and starts your VCR. This timer is available
through TV1 menus only.
Note: You can record only the program to which the receiver is tuned. If you
open any menu while recording a program on videotape, the menu also will
be recorded. If a program time changes by more than twenty-four hours, the
timer will not operate.
Event Timer Frequency
Once - Applies to a one-time program. If the program time changes, this
timer operates at the new time. The receiver deletes this timer when the
timer operates.
Mon.-Fri. - Applies to a program that is scheduled for Monday through
Friday on the same channel at the same time each day.
Daily - Applies to a program that is scheduled for Monday through Sunday
on the same channel at the same time each day.
Weekly - Applies to a program that is scheduled for once a week on the same
channel at the same time on the same day.
Before an Event Timer Operates
Two minutes before an event timer operates, the receiver displays a small
clock on the TV screen. This clock disappears when the program begins.
While the clock is displayed, you may do either one of the following:
Press the CANCEL button to clear the symbol from the
TV screen. This does not affect the timer; it will operate.
Press the INFO button to see more information on the
event timer. If you do this, you will have the following
choices:
Remember: Most TV
programs and films
are copyrighted. In
some cases,
copyright law may
apply to private,
in-home recording.

Table of Contents

Related product manuals