Distech Controls RT Series User Manual

Name: Distech Controls RT Series
Brand: Distech Controls
Rating: 5 (1 reviews)

32 pages

To Next Page

To Previous Page

LonWorks Wiring Guide

- None: No function will be associated with the input2
- Service: a backlit flashing Service alarm will be displayed on the thermostat LCD screen when the input is energized. It can be tied in to the AC unit control card, which provides an alarm in case of malfunction.2
- Filter: a backlit flashing Filter alarm will be displayed on the thermostat LCD screen when the input is energized. It can be tied to a differential pressure switch that monitor filters2
- Rem NSB: remote NSB timer clock input. Will disable the internal scheduling of the thermostat. The scheduling will now be set as per the digital input. The menu part related to scheduling is disabled and no longer accessible. It provides low cost s...2
LonWorks Wiring Guide7
Overview7
Summary Specifications:7
Table 1: Summary of Specifications for a Distech Controls’ LON Network7
Network Configuration7
LonWorks Wiring Guide8
LonWorks Wiring Guide9
Maximum Number Of Devices9
Maximum Cable Length9
Repeater9
Terminators9
Free Topology Network Segment9
Doubly Terminated Network Segment9
Only one LPI-10 interface is supported per segment. The other terminator must be an RC-type.9
LonWorks Wiring Guide9
Grounding Shielded Twisted Pair Cable10
Capacitor = 0.1(F, 10%, Metalized Polyester, ( 100V10
Figure 4: Network connections and location of the Status LED on a LON module10
Table 2 shows the different possibilities with the Status LED behaviour of the LON module.10
Table 2: Status LED condition10
PAN ID23
This parameter (Personal Area Network Identification) is used to link specific thermostats to a single specific wireless gateway ( EC-BOS ) For every thermostat reporting to a gateway ( maximum of 30 thermostats per gateway ), be sure you set the SAME PAN ID value both at the gateway and the thermostat(s).23
Channel24
Distech Controls recommends using only the 2 last channels ( 25-@ 2575MHz and 26-@ 2580MHz )24
DI 124
Default value = None24
Filter, a back-lit flashing Filter alarm will be displayed on the thermostat LCD screen when the input is energized24
Service, a back-lit flashing Service alarm will be displayed on the thermostat LCD screen when the input is energized24
Frost pr25
On or Off26
Unocc TM27
2/4event27
Prog rec27
low bp28
O or B28
Off or On29
Troubleshooting guide30

Questions and Answers:

Need help?

Do you have a question about the Distech Controls RT Series and is the answer not in the manual?

Distech Controls RT Series Specifications

General

Brand	Distech Controls
Model	RT Series
Category	Thermostat
Language	English

Related product manuals

ECLYPSE ECY-STAT

124 pages

Distech Controls RT Series User Manual

Table of Contents

Questions and Answers:

Distech Controls RT Series Specifications

Related product manuals