1330 Operator’s Manual Drive - 35
Steer
CMW
Steer
1. Push axle lock to unlock wheels.
2. Push down on handlebar.
3. Turn machine.
Shut Down
1. Move speed/direction control to N (neutral).
2. Push boom control to lower digging boom, if space allows.
3. Release bail.
4. Run engine at low idle for three minutes to cool.
5. Turn ignition switch off.
6. Close fuel shut-off valve
7. Remove key.
NOTICE: Machine should not be parked on a slope unless chocked or blocked.
To Next Page
Loading...