Service - 66 1330 Operator’s Manual
10 Hour Service
CMW
Grease Cylinder:
To tighten digging chain, pump MPG into cylinder at check valve zerk.
To loosen digging chain, stand on opposite side of boom and unscrew check valve zerk to release grease.
NOTICE: Do not overtighten chain. Overtightening will cause chain stretch, loss of machine
performance, and possible premature chain failure.
Fluid pressure could pierce skin and cause injury or death. Stay away.
NOTICE: Service digging boom grease cylinder only while standing on opposite side of
boom. Wear gloves and safety glasses and cover fitting with cloth when relieving pressure
in cylinder.
To Next Page
Loading...