Service - 68 1330 Operator’s Manual
20 Hour Service
CMW
Lube Headshaft Bearing
Lube headshaft bearing with MPG every 20 hours.
Change Engine Oil
Change engine oil after the first 20 hours of operation and every 100 hours thereafter.
1. Drain (2) while oil is still warm.
2. Replace plug.
3. Refill at fill neck (1) with 2.3 pt (1.1 L) of GEO.
IMPORTANT: If operating in extremely dusty conditions, change oil more frequently. Use oil specified in
temperature chart found in “Recommended Lubricants/Service Key” on page 58.
To Next Page
Loading...