Ditch Witch 420sx - Page 38

420sx Operator’s Manual Controls - 37
Attachment Controls
CMW
5. Drill direction/chain
reverse switch
(optional)
In Roto Witch mode:
To rotate drill string clockwise,
push and hold switch in the
clockwise rotation position.
To rotate drill string counter
clockwise, push and hold
switch in the counter
clockwise rotation position.
In trench mode:
To reverse direction of
digging chain, press and hold
either top or bottom of switch.
Switch returns to center when
released.
IMPORTANT: Switch must be in the
center position in order to start
engine.
6. Attachment speed To operate front or rear
attachment at low speed,
push L.
To operate front or rear
attachment at high speed,
press H.
7. Work light switch To turn on, set switch to the
on position.
To turn off, set switch to the
off position.
Item Description Notes