Controls - 24 RT80 Operator’s Manual
Center Console
CMW
Indicators
1. Operator presence indicator
2. Attachment speed/direction indicator
3. Ground drive indicator
4. Cruise control indicator
5. Hydraulic fluid temperature indicator
6. Hydraulic filter restriction indicator
7. Low speed indicator
8. High speed indicator
9. Shift alert indicator
10. Cold start wait indicator
11. Console temperature indicator
12. Parking brake indicator
Item Description Notes
1. Operator presence
indicator
Lights when operator is in
seat.
IMPORTANT: This indicator is part of
the start interlock system. All three
start interlock indicators must be on to
start engine.
To Next Page
Loading...
