RT80 Operator’s Manual Controls - 25
Center Console
CMW
2. Attachment speed/
direction indicator
Lights when attachment
speed/direction control is in
neutral.
IMPORTANT: This indicator is part of
the start interlock system. All three
start interlock indicators must be on to
start engine.
3. Ground drive indicator Light when ground drive hand
and foot controls are in
neutral.
IMPORTANT: This indicator is part of
the start interlock system. All three
start interlock indicators must be on to
start engine.
4. Cruise control indicator Lights when cruise control is
operating.
Flashes when an electrical
error is detected. Contact
your Ditch Witch dealer.
See “Cruise Control” on page 98.
5. Hydraulic fluid
temperature indicator
Lights and alarm sounds if
hydraulic fluid overheats.
• Turn off engine and let it cool.
• Check hydraulic fluid level.
• Check front of hydraulic fluid
cooler for debris.
Item Description Notes
To Next Page
Loading...
Need help?
General
